IPX 7 10w 1000 Lumen Tactical Flashlight 100m For 20 MM Rail Guns Weapons

1000 Lumens TacticalHunting Flashlight weapon light For 20 MM Rail Guns Weapons

1000 Lumens TacticalHunting Flashlight weapon light For 20 MM Rail Guns Weapons Can be used in hunting and camping

Feature

XP-L V6 LED have max 1000 lumens
* Securely fits a broad range of weapons. Item dimensions is 3.39 length x 1.47 width x 1.44 high in inches
* One handed snap-on and tighten interface keeps hands away from muzzle when attaching/detaching
* T6061 series machined aircraft aluminum with anodized finish with high temperature, shock-mounted glass lens
* TIR optic produces a concentrated beam with optimum peripheral illumination; Battery Quantity - 2

* This lightweight, compact, high lumen lithium battery powered tactical flashlight features the latest

in shock-proof power LED technology and provides 2-3 hours of continuous run time. A tethered battery door

and latch mechanism prevents battery door loss while providing easy battery replacement. The rail clamp is designed

to rapidly attach/detach from the side of a weapon. When enabled, the strobe can be activated on two or

more momentary paddle hits.

Specification

Packing List

1 x Gun light
2 x CR123A battery
1 x hexagon wrenches
4 x gun key part

Product Picture

Compatibility List

Beretta:
90two- 90two key.

Cx4 Storm (carbine/rifle)- 1913 key.

Px4 Storm (pistol) - GL (Standard) key. note: M-lights are very loose.

Vertec - New polymer key- 1913; Older aluminum key – GL (Standard) Key.

CZ:

P-01 - Should work with GL (Standard) key. (Not tested; based on similar European version).

FN:

5.7 (with Picatinny style rail) -1913 key.

Glocks:

Any with rails – GL (Standard) key. Cannot fit Glocks that are not equipped with factory rails.

HK:

USP (full size only) - use HK adapter 69085 with a GL (Standard) key. Compact size - use HK adapter 69091 with a GL (Standard) key.

HK P2000 (new) is supposed to have Picatinny rail.

HK P30 -1913 key.

Note: The rail tilts down slightly from the bore. This may result in laser zeroing difficulty closer than 50 feet (depending on the tolerances of the pistol and laser).

Kimber:

TLE RLII (1911 with rail) - Picatinny key.

Ruger:

KP345 - GL (Standard) key.

SR-9 - GL (Standard) key.

Sig Sauer:

GSR or 1911 Style with flat bottom rail - Picatinny key.

Any aluminum frame SIG with a round bottom rail, including the P220R, P229R, etc.: The Sig round bottom rail departs from the true shape of both the 1913 and Universal standards and may cause an improper fit. The TLR will work with the 1913 key but there will be damage to the finish of both the gun and the light. The retaining screw must be tight.

Newer Sig P series guns are supposed to have a true Picatinny rail. This has not been verified by Streamlight.

SP2022 (Polymer frame): Same comments as for aluminum frames, except that the polymer frame is a little thicker and does not show marks from a clamp. Per SIG, use the 1913 key.

Smith & Wesson:

TSW and 99: the slot is too far back for the standard key and requires the special S&W key. There are many different models of TSW, but if it's a TSW with a rail, it uses the S&W key.

M&P Autoloader - Picatinny key.

Sigma - Cannot fit.

Springfield Armory:

Operator (1911 with rail) - Picatinny key.

XD (4 & 5-inch barrels) - GL (Standard) key. Cannot fit 3inch barrel.

Walther:

99 (New 2004 models): full size ones are nearly the same as the S&W 99 and use the S&W key. Older ones (no slot across the rail and the side grooves closed in front) cannot be fitted with a TLR.

99 Compact – Cannot fit. Rail is too short.

P22 – Cannot fit. Non-standard rail.